Oil-bath Air Cleaner

Home → Air filters → Housings

Industrial Oil-bath Air Cleaner

The proven oil-bath air cleaners from MANN+HUMMEL are suitable for light to medium dust conditions and have long been established in our range of air cleaners.

Servicing can be made without spare parts using engine oil available on site and cleaning can be carried out with diesel fuel. This makes the oil-bath cleaner practically independent of service supplies. It is therefore often used in machines and vehicles which have to operate reliably in remote regions where a supply of spare parts is not always guaranteed.

Key advantages of oil-filled filter:

• super durable metal construction;

• no need for spare parts for maintenance;

• allows the passage of air flow of 1.4 cubic meters / minute to 19 cubic meters / min.

Important! With self-determination of the filter is necessary to consider that the products bandwidth size must match the max engine air demand.

These requirements cannot be ignored because:

1. In a large or too low air filter of the oil fill is greatly reduced filtration efficiency of the working environment.
2. When the filter element is too small or excessively high level of oil, it will be triggered by premature wear of the device.

Important! Oil-filled filters can be mounted in an upright position.

The structure and function of the oil-filled filter

1. The air flow intake filter element, passes through a special oil reservoir where cleaning is carried out by dust and so forth. Abrasive microparticles.
2. Then, the air flows upwards, while the steel tip is washed oil filter fluid from the reservoir.
3. As a result, the air contained in the intake dirt microparticles precipitate. These substances fall into the reservoir together with the oil coming back and are deposited there.
4. Thus, the maximum degree of dedusting oil-filled filter reaches 98.5%.